Bell Buttons and Contacts

BELL BUTTON PROTACT 380 5-24V

GROTHE
017.061.031

In stock

PVP s/IVA: 6,50€

More info

Bell button
• Button white-grey plastic • Diameter of button
button 11.5 mm
• Button collar black plastic • Diameter of button
collar 20.0 mm

Innovative bell button with reliable precious metal switching
contacts and time-saving wiring technology for installation in
door stations or for industrial use
Product features
• Maximum reliability due to corrosion-free switching contacts
with a silver alloy incl. gold-plating
• Optimum switching behaviour due to tactile feedback and
precise button guidance in collar
• Very low bounce times due to optimum switching contacts
snap effect; ideal for BUS intercom systems
• Short installation time due to screwless special terminals;
ideally suitable for through-wiring
• Suitable for plate thicknesses up to 6 mm despite extremely
compact design
• Noble look due to high-quality materials and surfaces
Installation
• Plate hole 16 mm (replacement-compatible with predecessor
models MKO/KKO), plate thickness 0.5 mm to 6.0 mm
• Installation depth 13 mm minus plate thickness
(e.g. for 2 mm plate thickness, 11 mm installation depth)
• Time-saving fitting without tools thanks to easy-to-grip
knurled nut
Technical data
• Max. 24V=/~ (1.5A); min. 5V (1mA)
• Voltage drop in new condition 0.1V; contact resistance 0.1Ohm
• Insulation resistance: Min. 100 MOhm
• Bounce time < 20 ms
• Suitable for rigid wires with diameter 0.6 mm to 0.8 mm
• Actuating force approx. 6 Newton
• Contact travel 0.8 mm / Total actuating travel 1.2 mm
• -20°C to +60°C
• IP 54 (when installed, vertical plate)
• Protection against vandalism through compressive force
limitation (withstands min. 100 N actuating force)
• Materials: switching contacts made of chrome-nickel steel
with silver alloy and gold-plating; housing made of glassfibre
reinforced ABS for optimum stability; special terminals
made of tin-plated chrome-nickel steel; for button/button
collar, see ordering overview
• Installation position: any (see note at "IP54")
• Min.service life at 12V~ / 0.75A (standard bell system)
approx. 100,000 cycles (note: tactile switching behaviour
up to approx. 30,000 cycles, thereafter constant switching
behaviour until the mechanical service life of 250,000 cycles,
corresponds to a service life of 8 years when actuated
10 times daily).
Note
• At higher currents the gold surface of the switching contacts
disintegrates for physical reasons. This is not indicative of
poor quality, rather just means that the bell button can subsequently
no longer be used for small currents in the mA range.

Reviews

No customer comments for the moment.

Write a review

BELL BUTTON PROTACT 380 5-24V

BELL BUTTON PROTACT 380 5-24V

Write a review

30 other products in the same category: